Below are two different sample outputs:

	Sample 1 (no boot menu):

Power on 

FGT1000(02.28.2002)
Ver:02060000
SerialNum:FGT-1k28010xxxxx
SDRAM Initialization
Scanning PCI Bus...Done.
Total RAM: 256M
Enabling Cache...Done.
Allocating PCI Resources...Done.
Zeroing IRQ Settings...Done.
Checking IRQ Routing Tables...Done.
Enabling Interrupts...Done.
Configuring L2 Cache...Done.
Boot Up, Boot Device Capacity=61MB.
Press Any Key To Download Boot Image.
...

Enter tftp server address [192.168.1.168]: 172.16.5.99    (the IP address of the TFTP server/daemon)
Enter local address [192.168.1.188]: 172.16.5.98  	  (any IP address as long as within the same subnet as previous value.)
Enter File Name [image.out]: FGT_1K-v250-build251-FORTINET.out
MAC:00:09:0f:03:01:cb 100Mbps full-duplex
########
Total 8716388 Bytes Data Is Downloaded.
Verifying The CF Image.

Total 32768kB Are Unzipped.
Do You Want To Save The Image ?[Y/n]   (Answer 'Y' here.)
Programming The Boot Device Now.
................................
Reading Boot Image 892549 Bytes.
Initializing Firewall ...


(none) login: admin
Password: 
Welcome!


	Sample 2 (with boot menu):

Power on

FGT60 (19:33-06.05.2003)
Ver:03000300
Serial number:FGT-6028030xxxxx
RAM activation
Total RAM: 128MB
Enabling cache...Done.
Scanning PCI bus...Done.
Allocating PCI resources...Done.
Enabling PCI resources...Done.
Zeroing IRQ settings...Done.
Verifying PIRQ tables...Done.
Boot up, boot device capacity: 30MB.
Press any key to display configuration menu...
.
[G]:  Get firmware image from TFTP server.
[F]:  Format boot device.
[Q]:  Quit menu and continue to boot with default firmware.
[H]:  Display this list of options.

Enter G,F,Q,or H:		( Press 'F' here.)

Formatting boot device...
...............
Format boot device completed.

Enter G,F,Q,or H:		( Press 'G' here.)

Enter TFTP server address [192.168.1.168]: 192.168.171.129	(the IP address of the TFTP server/daemon)
Enter local address [192.168.1.188]: 192.168.171.171		(any IP address as long as within the same subnet as previous value.)
Enter firmware image file name [image.out]: FGT_60-v280-build219-FORTINET.out
MAC:00:09:0f:0a:1a:7c
##########
Total 10643362 bytes data downloaded.
Verifying the integrity of the firmware image.

Total 28000kB unzipped.
Save as Default firmware/Run image without saving:[D/R]?	(Press 'D' here.)
Programming the boot device now.
The system must format the boot device to install this firmware.
The default and backup firmware will be deleted.
Continue (Y/N)?:						( Press 'Y' here.)
....................
Reading boot image 1368285 bytes.
Initializing firewall...
System is started.


Fortigate-60 login: admin
Password: 
Welcome !

Fortigate-60 #